m2c3700 SERPENT WEIGHT FORWARD TRUGGY KIT

 

Tested and approved by AUSTIN WOODYARD. This is a game changer for the Serpent truggy.

If you have any questions about this chassis contact Curtis Woodyard on facebook.

These chassis are made using 1/8 inch(3.25mm) thick 7075 aircraft grade materials and clear anodized.

we have tested and tweeked these chassis to provide the racers a top notch chassis that will perform very well on all surfaces.

this model is made for the tracks with a high wear charastics such as we have in western states , up north and canada .

our testers noticed a little more drop in the front end due to extra 5 grams of weight in the front skid plate, but not enough to

effect handling and added to turn in , and foward bite  in most cases.

this model will give you a much longer chassis life than  other models as you can replace the steel skid plates and be back to a new

chassis thickness.

It is important to note that these skid plates fit flush to the bottom of the chassis and will not effect the droop settings and cause you to

scrub speed on the landings.

This chassis has been modified to shift the weight foward by 14mm. the effects of this has shown that it takes out the push in corners

and turns on a dime. We have made this design to allow you to use standard  parts.

I have included a spacer plate that will raise the center diff and radio tray.

YOU WILL NEED THE FOLLOWING ITEM TO COMPLETE THE ASSEMBLY OF THE KIT.

these are stock serpent parts

BUGGY CENTER DIFF MOUNT   600742

FRONT DRIVE SHAFT               600509

REAR DRIVE SHAFT                 600513

buggy radio tray                      

FEATURES:

hardened droop screw stops to prevent chassis wear and droop changes.

A longer milled out area for the clutchbell to help prevent clutchbells from hitting the chassis during chassis flex.

milled out area for gas tank screws to help keep tanks from cracking.

hardened steel rear skid plate

m2c3700 SERPENT WEIGHT FORWARD TRUGGY KIT
Click To Enlarge
  • Item #: m2c 3700
  * Marked fields are required.
Qty*
Price $130.00
Availability In-Stock