m2c6060 34mm ON ROAD 4 SHOE VARIABLE WEIGHT CLUTCH KIT

WELCOME to newest model   OF M2C RACING"S  FLYWHEELSKITS.

This kit is designed for ON ROAD GT CARS TO CONFORM TO ROAR RULES.

Due to the design these shoes can be ran in  EITHER direction to give you MAXIUM BITE NEEDED FOR THE ON ROAD CARS.

 THE LIGHTEST TO THE HEAVIEST FLYWHEEL iN ALUMINUM ON THE MARKET BY SIMPLY ADDING THE WEIGHTS TO HELP CONTROL WHEEL SPIN. THE STRONGER THE MOTOR THE MORE WEIGHTS YOU ADD THE LOOSER THE TRACK THE MORE WEIGHT YOU ADD. THE FLYWHEELS CAN BE LOADED OFF THE MOTOR. THE 8MM CLUTCH NUT WILL ALLOW YOU TO CHANGE FLYWHEELS WITHOUT REMOVING THE SHOES. THIS NEW VARIABLE WEIGHT FLYWHEEL IS DESIGNED TO FIT ALL 1/8 SCALES . THIS ALLOWS YOU TO ADD OR REMOVE WEIGHT TO FIT TRACK CONDITIONS. THIS FLYWHEEL STARTS OUT AT 19.0 GRAMS WITH NO WEIGHTS AND IS ADJUSTABLE UP TO 24.5 GRAMS WITH SHOES.  FITS ALL 1/8 SCALE VEHICLES WITH NO MODIFICATIONS. KIT INCLUDES: (1) 4 SHOE FLYWHEEL NEW EASY ON CLUTCH NUT AND TAPERED COLLET.

THIS SYSTEM COMES WITH THE FOLLOWING:

 (1) SET MEDIUM CLUTCH SHOES (1) SET .9 (RED) SPRINGS (1) SET .95 (YELLOW) SPRINGS (1) SET 1.0 (BLACK) SPRINGS (1) SET 1.05 (GREEN) SPRINGS (1.1 GOLD SPRINGS(1) SPRING WRENCH (1) PK 4MMX6MM SET SCREWS (1) MOCK CRANK TOOL THAT ALLOW YOU TO CHANGE SHOES OFF THE VEHICLE WITHOUT INJURY SINCE WE HAVE ALL STUCK OURSELVES WITH A SCREWDRIVER TRYING TO CHANGE CONVENTIONAL CLUTCH SHOES. !!!!!! NOTE !!!!! TRACK CONDITIONS AND MOTOR MAY DICTATE A DIFFERENT CLUTCH SHOE.

This flywheel is designed so that it can be assembled on or off the car. That way u can have multipal clutches already built with different 

springs and weights and only have to change the flywheel and be ready to go in about 5 minutes.

This clutch system fits:

MUGEN, LOSI, HOT BODIES,ASSOCIATED,DURNAGO TEKNO, KYOSHO(TRUGGY) KYOSHO BUGGY(32MM M2C 6325)

WORKS WITH STOCK CLUTCH BELLS.

m2c 6006 medium shoes

 

 

SPRINGS:

USES THE 9000 SERIES SPRINGS.

NOTE::::::: most spring tools will work with this system.   this tool makes it much easier to change shoes.

Is also helps you avoid sticking a screw driver in your hand

 spring wrench is included with kit

WHEN REMOVING CLUTCH SHOES, WHEN SLIDING THE SHOE UP THE POST, PUT SCREW DRIVER AS CLOSE TO POST AS POSSIBLE.

DO NOT PRY ON THE END OF THE SHOE.

CLUTCH SHOE ASSEMBLY:

https://www.youtube.com/watch?v=gEyRSt-8rW8

m2c6060 34mm ON ROAD 4 SHOE VARIABLE WEIGHT CLUTCH KIT
Click To Enlarge
  • Item #: m2c 6060
Price $59.99
Availability Out-of-Stock