M2C RACING

17MM HEX ADAPTORS FITS 6MM AXLES FROM .kIT INCLUDES (4) 17MM NUTS AND 4 3MM SET SCREWS AND 1.5 ALLEN WRENCH DIRECT BOLT ON. THIS DESIGN IS USING THE SIDE HOLE TO MOUNT THE HUB. USES THE STOCK PIN AND IS CAPTURED WITH A 3MM SET SCREW. THIS WILL TAKE THE PRESSURE OFF THE PIN AND BEARING THE NUTS ARE A SURE LOCK DESIGN THAT WILL GREATLY REDUCE THE CHANCE OF THE NUT BACKING OFF. ANODIZED BLACK

NOTE:::::

THESE HUBS ARE MADE TO USE A 2.5MM X 12  PIN. THESE COME STOCK WITH THE 10-T.

IF YOU USE THESE FOR ANOTHER APPLICATION YOU WILL NEED A PIN 2.5 X 12 MM PIN

PART NO. M2C 7751